 |
 |
| Compatible with Windows operating systems |
Looking
for a USB 2.0 16' long Repeater Cable? Click the following
link to purchase Model GM-800-5M at $34.98
|
|
 |
No
Setup Configuration, No Driver Installation, No IRQ
Conflicts...Just plug your cable(s) into the 16 foot
USB Repeater Cable and you're
ready to GO!
Typical USB Extension Cable Configuration
The above diagram is
a representation of how the USB repeater cable functions.
The repeater cable connects to the usb port of your PC or
laptop then to the usb cable of the usb device.
The USB Repeater Cable Model
GM-500-5M Overview
Shown here is The USB Repeater Cable model
GM-500-5M 16' long. |
The
USB Repeater Cable is not a passive extension
usb cable. It's an active device allowing you to extend
other
USB cables. The USB signals going in and out of the
extension cable are bufferd to assure signal quality
and the meeting of the USB Electrical and Timing Specifications.
Using passive cables for the purpose of extension
will result in signal errors and is not recommended.The
USB repeater cable connects directly to the usb port
The USB Repeater Cable allows a USB
device to have its cable length extended by up to
an additional 40
to 80 ft. By connecting 8 and 16ft. cables in a serial
fashion, The USB Repeater cable acts as a transparent
USB hub and buffers both downstream and upstream data
traffic. Both Low and High speed devices will function
as well as if they were directly connected to a USB
Port with the USB Repeater Cable. |
Repeater Cable Specifications
PARAMETER
|
VALUE |
UNITS |
NOTES |
| USB
Cable Length |
8
/ 16 |
FEET |
Embedded
USB Transceivers Cable Prevents Signal Lose |
| Maximum
Supply Current Drawn |
5.0 |
mA |
MAX@40C
Typical current less than 3mA |
| Maximum
Cable Voltage Drop |
0.095 |
Volts |
@500mA,
Ta=40 |
| VBUS
an GND Wire Size |
20 |
AWG |
|
| D+&D-
Wire Size |
28 |
AWG |
Strand-Twisted
Pair. 90 )hm Charactristic Impedance |
| Cable
Shield |
|
|
Aluminized
wrap foil w/28AWG drain wire and copper mesh over foil.
UL Approved |
| High
Speed Mode |
12 |
Mbs. |
When
used w/High Speed Peripheral |
| Low
Speed Mode |
1.5 |
Mbs. |
When
used w/Low Speed Peripheral |
Operating
Temp. Range
Storage Temp. Range
|
0
- 4 0
-40+85 |
°C
°C
|
|
| USB
Transceiver Specification |
|
|
Meets
USB Specifications |
| Down
Stream Connector |
Female |
Type
"A" |
USB
Approved Connector |
| Down
Stream Connector |
Male |
Type
"A" |
USB
Approved Connector |
Repeater Cable Close Up
 |
This
is the usb cable female end of the USB Repeater
Cable and the brains of the operation. This is what
deligates
the
USB signal when connecting several USB repeater cables
in series or connecting one peripheral USb cable to
the repeater. The standard USB cable length is about
5 meters, the USB repeater cable or data extension
cable as it is sometimes called does as it's name
implies and extends or repeats the length of the standard
usb cable, or the length of data signal to its destination
peripheral or hub. This particular cable is 16 feet
long. |
Testimonial
 |
SWEET
and SIMPLE! All you have to know about USB is how
to plug it into your USB Port and the repeater takes
care of the rest. I tested this with my PhotoSmart
printer and it's 5 meter cable. I was in the living
room and the printer in the kitchen, about 20 feet
away. I very simply connected the female end of the
repeater to the USB printer cable and the male end
to my laptop, printed a document in no time flat just
as if I was connected directly to the printers USB
cable. This opens up possiblities for me as I work
out of my living room.
This is a home office must and will certainly allow
you more options when it comes to setting up a home
office with your USB cable peripherals. I would certainly
recommend this product to those who need to extend
thier USB cable and signal.
Bob Boisvert...Web Professional
|
|
 |
